Dorch Engineering – B58 Stage 1 HPFP Upgrade – DEN-FUP-B58-001

Dorch Engineering – B58 Stage 1 HPFP Upgrade – DEN-FUP-B58-001

Dorch Engineering – B58 Stage 1 HPFP Upgrade – DEN-FUP-B58-001

We are proud to offer the world?s first B58 HPFP upgrades! This is a complete plug-and-play kit to support up to 560whp on E10 fuel (this number can vary quite a bit depending on tuning strategy and the blend of ethanol). There?s no cutting, no bending, no crimping, etc. This kit drops right in with full control from the DME, just like the OEM pump. All of the safety and sophistication of the stock DME remain in place.

B58 HPFP Flow Capacities
The table below serves as a reference for maximum fuel flow in cubic centimeters per camshaft revolution for various B58 fuel pump options. These calculations are based on the B58 cam lobe. Each engine will have varying fuel flow capacities depending on the lift and number of lobes on the camshaft.
Pump Model Fuel Flow (cc/rev)
HDP5 Evo (Stock B58) .954
HDP6 (Stock B58TU) 1.178
Dorch Engineering Stage 1 1.299
Dorch Engineering Stage 2 1.558
Software changes are required to run this pump. If using Bootmod3, MHD, or MG Flasher, simply check the box for our pump upgrade when flashing. Otherwise, please send your .BIN file to tuning@dorchengineering.com for the appropriate software changes. This change is free of charge for all of our customers.

Kit Contents:

HPFP w/ Hardware
High Pressure Line
Quick Connect Low Pressure Line
Low Pressure Line Bracket
Plug-n-Play Adapter Harness

Kit Fitment:

F20/21 ? 140i, 140xi
F22/23 ? 240i, 240xi
F30/31/34 ? 340i, 340xi
F32/33/36 ? 440i, 440xi

G30/31 ? 540i, 540xi *
G32 ? 640i, 640xi *
G11/12 ? 740i, 740xi *

G01 ? X3 m40i *
G02 ? X4 m40i *

* ONLY UP TO 2019 Model Year
KIT NOT COMPATIBLE with 2020+ B58 Vehicles

Contact Us for further Information by filling out this FORM

Be sure to follow our Instagram page for new offers and the latest products @Partspluguk