JT Innovations – Shiftlight<.h2>
JT Innovations – Shiftlight
The shift light provides the following functions:
Toucan, Tacho-drive or OBD-II (CANbus-only) connection
8 high-brightness RGB LEDs
Each LED can be set to be yellow, orange, red, green, blue, magenta, cyan or white.
Each LED can be set to 1 of 4 different brightness levels.
Each LED has an “on” RPM setting. When the RPM is at or above this value, the LED will be ON. When below the setting, the LED will be OFF.
Each LED has an “off” RPM setting. When the RPM is at or above this value the LED will turn off again. If the value is set very high, the LED will, effectively, not turn off when the RPM is above its RPM “on” setting
Each LED can be set to flash or be on constantly when the RPM is above the “on” value
All LEDs can be set to flash or be on constantly with a chosen colour and brightness when the RPM is above an “on” value
When used with a Toucan, LEDs can be used to signal an alarm condition
Configuration via USB using the PC programme that can be downloaded from this website, or via Toucan.
Special mode to work with Life Racing/Syvecs ECUs on the I/O expander “slave” CANbus link at 1.33Mbit/s
Data Interface CAN 2.0A/2.0B at 1Mbit/s, 500kbit/s or 250kbit/s. OBD-II support (CAN only). 1.33Mbit/s mode (Syvecs/Life Racing)
Power 8-20V <20mA typ. Memory Non-volatile storage of all parameters Tacho 0-12V pulse/low-side drive Warranty 1 year Dimensions 100x20x16mm Weight 30g LEDs High Brightness RGB Package contents Shift Light unit, power/data cable harness, sticky tape for mounting, USB cable, installation guide.